SEQUOIA

1. Be sure that the platform PC is on remote mode. If not, type R for remote on the PC keyboadrd.
2. Set the IF level $= to\ 1.0$ (Type IFLEVEL 1.0). This value is used in every CAL.
3. QSELECT has a nominal setting of ``all''.
4. MAP; the SKIP must be a multiple of telescope pointings to fill in the footprint (nx$\times$ny$\times$QPTS). If GRID $= 5$; requiring 16 pointings, SKIP must be equal to 0, 16, or n$\times$16.
5. If you are trying to tune up the receiver at the low end of the band (SiO) and the receiver will not tune up:
   Make sure that you are in LOWER SIDEBAND.