next up previous contents index
Next: Pointing the Telescope Up: Turning on and pointing Previous: Subreflector Power Up

FAAS Power Up

To power up the focal plane array autocorrelation spectrometers (FAAS):
  1. turn on circuit breaker on the top of the middle panel of the FAAS rack in the annex.
  2. Hit the POWER RESET button located next to the circuit breaker switch
  3. Restart the FAAS program on the FAAS PC next to the rack
    if the program is running: type ALT F10 to exit and FAAS at the DOS prompt. For most observers, select option 1 of the displayed menu.